雕塑常采用树脂有两种：不饱和树脂和环氧树脂。应该还有很大一部分的朋友不知道这两种树脂的特点，下面我们就由山东景观雕塑厂家为我们介绍一下吧。
There are two kinds of resin used in sculpture: unsaturated resin and epoxy resin. There should be a large number of friends who do not know the characteristics of these two resins. Now let's introduce them to us by Shandong Landscape Sculpture Factory.
①不饱和树脂成型配制方法：191#树脂100份，过氧化环已酮4份；环烷酸钴溶液1—4份，色浆适量。若按生产条件流水作业进行配制，在搪瓷盆内放入100千克树脂，再加入4千克氧化环已酮糊，搅拌均匀，再加入钛青绿色浆糊适量，目观颜色达到所需要求即可，放置备用。不饱和树脂的优点是便宜。
(1) Forming method of unsaturated resin: 191_100 copies of resin, 4 copies of cyclohexanone peroxide, 1-4 copies of cobalt naphthenate solution, appropriate color paste. If the product is prepared according to production conditions, 100 kg resin is put into the enamel pot, 4 kg oxidized cyclohexanone paste is added to mix evenly, and a proper amount of titanium green paste is added to meet the requirements of visual color, then it can be put in reserve. The advantage of unsaturated resins is that they are cheap.
②环氧树脂的优点是固化收缩率低，电绝缘性能极好的树脂，对各种酸碱及有机溶剂都很稳定，拉伸强度可达45MPa－70MPa，弯曲强度可达90MPa－120MPa。配套固化剂可采用环氧树脂常温E-999固化剂。稀释剂采用丙酮（或环氧丙烷丁基醚）。模具胶衣采用耐高温、硬度高、韧性好的模具专用胶衣。制作的纤维增强材料采用33g/m2无碱短切毡和0.2mm玻璃纤维方格布。
(2) Epoxy resin has the advantages of low curing shrinkage and excellent electrical insulation. It is stable to various acids, bases and organic solvents. Its tensile strength can reach 45 MPa-70 MPa, and its bending strength can reach 90 MPa-120 MPa. The curing agent can be epoxy resin E-999 at room temperature. The diluent is acetone (or propylene oxide butyl ether). Mold rubber coat is special for mould with high temperature resistance, high hardness and good toughness. The fibre reinforced material is made of 33g/m2 alkali-free chopped felt and 0.2mm glass fiber square cloth.
Today's highlights are provided by Shandong Landscape Sculpture Manufacturers. For more cooperation, please visit our website: http://www.mmyljg.com.
