常见问题

联系我们

conww.jpg

公司: 山东绵邈园林景观工程有限公司

联系人:于经理

手 机: 18354188859

地址:山东省济南市高新区天辰路979号办公楼1-101

常见问题

您的当前位置: 首页>新闻动态>常见问题>铸铜雕塑要如何保养?

铸铜雕塑要如何保养?

发布日期: 2019-08-14 来源:http://www.mmyljg.com 点击: 发布人:admin

铸铜雕塑,是雕塑文化艺术的重要组成部分外,同时也是为城市增添光彩和品位内涵上好佳品;铸铜雕塑艺术创作的复原性好,所以很受艺术家们的喜爱。但同时,铸铜雕塑极其容易氧化,所以要多注意保养。下面,我们和山东景观雕塑厂家一起来看看上行是怎样对铸铜雕塑进行保养的吧!

Cast copper sculpture is not only an important part of sculpture culture and art, but also a good product to add luster and taste to the city. Cast copper sculpture art has good restoration, so it is very popular with artists. But at the same time, cast copper sculpture is extremely easy to oxidize, so we should pay more attention to maintenance. Next, we and Shandong landscape sculpture manufacturers to see how the upstream copper sculpture maintenance bar!
一、环境
I. Environment
保养铸铜雕塑重要的一关就是环境,它所处的环境必须保持干燥且没有尘埃和空气污染物等! 它所处的温室温度控制在18℃-24℃,湿度在40%-50%。
The key to maintain the copper sculpture is the environment. The environment must be dry and free of dust and air pollutants. The temperature of the greenhouse is controlled at 18 - 24 C and the humidity is 40% - 50%.
二、防御
II. Defense
在保养铸铜雕塑时,要学会防御一些外界的有害化学物质,如酸类、油脂、氯化物等。搬动铸铜雕塑一定要戴上棉丝手套,不可用手直接接触,以避免被手上的汗腐蚀,也不可用油污的纸或盒子来包装。
In the maintenance of cast copper sculptures, we should learn to defend against harmful chemicals, such as acids, greases, chlorides and so on. Moving copper sculptures must wear cotton silk gloves, not directly touched by hands, to avoid sweat corrosion on hands, nor can oil-stained paper or boxes be used for packaging.
三、清洁
3. Cleaning
在对铸铜雕塑进行清洁的时候要切忌小心谨慎,一定要用干净而又柔软的布片来擦去尘埃,对于雕塑有些沟处不易用布擦到的地方用毛刷或是吸尘器来吹走灰尘。
When cleaning the cast copper sculpture, we should be careful. We must use clean and soft cloth to wipe away the dust. For some places where the sculpture is not easy to be wiped by cloth, we should use brush or vacuum cleaner to blow away the dust.
山东景观雕塑
四、维护
IV. Maintenance
必须预防铸铜雕塑受到机械性损坏,相互间不应该彼此碰撞、不要叠压码放、对于细工精制和容易损坏的铜雕,更加要小心维护。
It is necessary to prevent the mechanical damage of cast copper sculptures. They should not collide with each other, do not overlap the codes, and be more careful in maintaining fine and easily damaged copper sculptures.
五、抛光
Polishing
铸铜雕塑摆放时间过长之后,根据摆放的环境或多或少会出现一些暗哑的现象,这个时候可以用棉丝质的细布轻轻来回擦拭,可达到抛光的效果,从而让表面的保护蜡层重新焕发光。
When the copper sculpture is placed for a long time, there will be some dumb phenomena according to the environment. At this time, it can be gently wiped back and forth with cotton silk cloth, which can achieve the polishing effect, so that the protective wax layer on the surface will glow again.
今天的精彩内容就暂且给大家介绍到这里了,欢迎大家百度搜索:山东景观雕塑,这样可以找到我们,我们会定期发布更多的相关资讯,大家也可以直接收藏我们的官网:http://www.mmyljg.com!谢谢大家长久以来的支持!
Today's wonderful content will be introduced here for the time being. Welcome to Baidu Search: Shandong Landscape Sculpture, so that we can find us. We will release more relevant information regularly. You can also directly collect our official website: http://www.mmyljg.com! Thank you for your long-standing support!

在线客服
分享