行业新闻

联系我们

conww.jpg

公司: 山东绵邈园林景观工程有限公司

联系人:于经理

手 机: 18354188859

地址:山东省济南市高新区天辰路979号办公楼1-101

行业新闻

您的当前位置: 首页>新闻动态>行业新闻>玻璃纤维雕塑的保养和维护很重要!

玻璃纤维雕塑的保养和维护很重要!

发布日期: 2020-01-09 来源:http://www.mmyljg.com 点击: 发布人:admin

  当今社会,随着玻璃纤维雕塑的使用越来越广泛,玻璃纤维雕塑的保养和保养也很重要,玻璃纤维雕塑外观龟裂现象怎么办?一般情况下,简单保养要知道一些,出现裂纹的处理也要知道,当然,土豪除外,出现裂纹直接换新的,这是外部性的。

  In today's society, with the more and more extensive use of fiberglass sculpture, the maintenance and repair of fiberglass sculpture is also very important. How to deal with the appearance crack of fiberglass sculpture? In general, we need to know something about simple maintenance and the treatment of cracks. Of course, with the exception of local tyrants, cracks are directly replaced, which is external.
  注重摆放方位:由于玻璃钢雕塑不能放在阳光下暴晒,时刻长了会出现裂缝,而时间长了以后,表面的颜色也会因室外原因变得浅、淡。不能在潮湿的地方放置长时间发霉的头发。在潮湿的环境中,霉菌生长迅速,玻璃纤维雕塑的表面生长出一层层的绒毛,既没有吸引力,也没有吸引力。日常清洁:当然,不要用湿毛巾擦拭,要用干布或鸡毛掸子擦洗。通常要保护和清洁,尽量避免玻璃纤维雕塑外面直接喷水,当然,除了雨天,玻璃纤维雕塑是防水的,但长期潮湿,它会发霉,所以有水时要及时用干毛巾擦干。定期保养:玻璃纤维雕塑时间长了就会失去光泽,要用毛刷打蜡来涂在玻璃纤维雕塑的外观上。
  Pay attention to the placement position: because FRP sculpture can't be exposed to the sun, cracks will appear for a long time, and after a long time, the surface color will become light and light due to outdoor reasons. Do not place moldy hair in damp places for a long time. In the humid environment, mold grows rapidly, and the surface of glass fiber sculpture grows layers of fluff, which is neither attractive nor attractive. Daily cleaning: of course, do not wipe with wet towel, but with dry cloth or feather duster. Generally, it should be protected and cleaned to avoid direct water spray outside the fiberglass sculpture. Of course, except for rainy days, the fiberglass sculpture is waterproof, but it will get moldy if it is wet for a long time, so it should be dried with a dry towel in time when there is water. Regular maintenance: the glass fiber sculpture will lose luster after a long time. You need to use a brush to wax the appearance of the glass fiber sculpture.
山东景观雕塑
  玻璃钢雕塑的制作方法可分为湿接触型和干压型两大类。如根据工艺特点,有手糊成型、层压成型、RTM法成型、挤出成型、周边成型等。手糊成型还包括手糊法、袋压法、喷射法、湿糊低压法和无模手糊法。和玻璃纤维增强塑料(FRP)成品制造,个产品是由特定的泥浆材料形状相应的产品,粘土制造草案后,把石膏模型,然后是玻璃钢(也就是说,树脂和玻璃纤维布的结合)涂覆刷模具外的内部。其干燥后,打开外部模具,通过模具程序,得到玻璃钢雕塑成品。但玻璃纤维雕塑在室外经过日晒和风蚀,一般五年多就开始出现变形、裂纹微弱的缺陷。在玻璃纤维雕塑的保养中也很重要,这样我们的玻璃纤维雕塑就可以使用的更久,而且美观。
  The production methods of FRP sculpture can be divided into two categories: wet contact type and dry compression type. For example, according to the process characteristics, there are hand lay up molding, lamination molding, RTM molding, extrusion molding, peripheral molding, etc. Hand lay up method includes hand lay up method, bag press method, spray method, wet lay up low pressure method and formless hand lay up method. And glass fiber reinforced plastic (FRP) finished products manufacturing, the first product is made of a specific mud material shape corresponding to the product, clay manufacturing draft, gypsum model, then Fiberglass (that is, the combination of resin and fiberglass cloth) coating the inner part of the mold. After drying, open the external mold, through the mold program, get the finished FRP sculpture. However, after being exposed to the sun and wind, the glass fiber sculptures usually begin to have defects of deformation and weak cracks in more than five years. In the maintenance of fiberglass sculpture is also very important, so that our fiberglass sculpture can be used for a longer time, and beautiful.
  仿玉、仿石,等等效果,比如:仿古铜,工艺和效果有10种,色泽自然、饱满,铜质感强,铜锈真,图案、纹路很精致,是金属制品到不了的。玻璃钢雕塑制作选用手糊成型方法。根据雕塑在制作前的形状特点,从容易成型和脱模的角度出发,可以将模具合成为若干个单元。从这里得到单位积,然后把它们组合成一个整体。*** *产品全部处理及喷漆后,完成了一件玻璃钢雕塑作品。
  Imitated jade, imitated stone, and other effects, such as: imitated ancient copper, there are 10 kinds of crafts and effects, natural and full color, strong copper sense, true copper rust, delicate patterns and lines, which are not available for metal products. Fiberglass sculptures are made by hand. According to the shape characteristics of sculpture before making, from the point of view of easy forming and demoulding, the mold can be synthesized into several units. From here we get the unit product, and then we combine them into a whole. **** after all the products are processed and painted, a fiberglass sculpture is completed.

在线客服
分享